How to Build a CI0 Tally LED Assembly

Source

This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Accessories/BuildTallyLED

How to assemble a solder-free tally light for use with the RIO/CI0.

Parts needed

• A 12V red LED (with wiring)
• A tool-less wire plug connector
• A CY-CBL-6P-PWR cable

Assembly steps

Step 1: Cut the LED wiring

Cut the LED wiring to the required length, making sure to remove any extra exposed copper at the end.

Step 2: Prepare the CY-CBL-6P-PWR cable

Cut the CY-CBL-6P-PWR cable as well, removing any extra exposed copper.

Step 3: Watch the polarity

The plug has a "+" mark indicating the red wire side. Make sure you connect the wires with the correct polarity.

Step 4: Insert the wires into the plug

Insert the wires all the way into the plug.

Step 5: Close the plug firmly

Close the plug and press it firmly.