CI0 Ports
Source
This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Manuals/CI0/CI0Manual
https://support.cyanview.com/docs/Manuals/CI0/CI0Manual
This page describes the general characteristics and configuration of CI0. For camera-model-specific integration details, refer to each camera's integration guide.
Serial Port
- Connector: Hirose HR10A-7R-6S(73) (mating cable-side plug: HR10A-7P-6P(73))
- Cyanview provides a range of cables to interface most cameras. See the cable list in Accessories. Each camera's integration guide also says which cable to use.
Port Pinout (Female Receptacle Side)
| Pin | RS232 | RS422 | RS485 |
|---|---|---|---|
| 1 | - | Y/TX+ | A/+ |
| 2 | TX | Z/TX- | B/- |
| 3 | RX | A/RX+ | - |
| 4 | - | B/RX- | - |
| 5 | GND | GND | GND |
| 6 | +12V | +12V | +12V |
| Shell | - | - | - |
CI0 Models
| Model | Features |
|---|---|
| CY-CI0 | Standard 2 ports |
| CY-CI03P | Adds a 3rd port for camera head management |
| CY-CI0BM | 2 ports with Blackmagic SDI control extension (see the Blackmagic serial camera integration guide) |
Supported Protocols
| Port | RS485 | RS232 | RS422 | LANC | SBUS | VISCA | B4 Lens |
|---|---|---|---|---|---|---|---|
| P1 | ✓ | ✓ | ✓ | - | - | ✓ | ✓ |
| P2 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| P3 | - | - | - | - | ✓ | - | - |
Ethernet Port
10/100Mb Ethernet, with PoE+ (IEEE802.3af/at) support.