Control from the RCP

Source

This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support-next.cyanview.com/docs/products/software/cyan-camera-app

Once CyanCamera is connected to a gateway, it can be controlled from a Cyanview RCP just like any other camera.

Auto and manual

When the RCP sets a value, that parameter switches to manual and its dot in the app turns orange. Tap the value (on the phone or the RCP) to return it to auto.

Parameters the RCP can control

• ISO
• EV (exposure compensation)
• Shutter
• Iris
• White balance + tint
• Lens
• Zoom
• Focus

The RCP can also:

• Toggle red tally (red border around the picture)
• Start / stop recording
• Report timecode

Custom buttons

The following buttons are available under Camera → Custom buttons on the RCP.

Button	Function
RTP / SRT / WebRTC	Start / stop streaming in that mode
Lens mm buttons	Switch the physical lens
bit- / bit+	Step the stream bitrate by ±0.1 Mbps
CorrON / CorrOFF	Turn RCP color corrections on / off
RecToggle	Start / stop recording