AJA RovoCam

Source

This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Integrations/AJA/RovoCam

Wiring

Cable needed: CY-CBL-6P-AJA-01 (see the Cable Catalog)

note

• Compatible with CI0/RIO
• The camera is powered by the CI0/RIO (data + control + power over a single cable)
• To control it wirelessly, you need a RIO
• You can plug one camera per CI0/RIO port
• Because every camera has a unique ID, you can also chain several cameras on a single CI0/RIO port, on a bus

Camera Control

Control	Supported
White balance (R/B and color temp)	✓
Black balance (R/B, master pedestal)	✓
Other controls (master gamma, saturation, detail)	✓
Exposure (iris, gain, shutter)	✓
Camera menu control	✓
Lens (zoom, focus)	✓
Scene files: save/recall	✓

Setup

Before you start: set up / note your camera ID using the AJA RovoCam app.

Create a VISCA Bus

Access the RCP Configuration UI and create a new Sony VISCA bus:

1. In the "Feature" block, click "+".

2. Select "Sony: VISCA Bus".

   

3. Click the new block and configure:

   • Bus ID range: 0–7 (default)
   • Bus type: RS232
   • Baud rate: 9600
   • Serial port: the CI0 and port the camera is connected to (e.g. CI0-31-52:1 means port 1 of CI0 "CI0-31-52")

   

   

Create the Camera

1. In the RCP Configuration UI, click "+" in the Camera section.
2. Enter a custom number, name, etc.
3. Select the "AJA" brand.
4. Select "Rovocam" as the model.
5. Select the camera bus and camera ID.

Once correctly connected, the block turns green.