Skip to main content

VMix

Source
This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Integrations/VMix/

VMix logo

Integrating the RCP with VMix gives you:

  • Tally input
  • Aux output switching to stay in sync with the RCP
  • Color correction

Wiring​

Connect the RCP and VMix to the same network.

VMix wiring

Setup​

Make sure your RCP has an IP address matching your VMix computer. To add an IP address to the RCP, see "LAN Configuration" in IP Configuration.

Router​

In the Configuration tab, click "+" in "Components" and add VMix under "Router / Switcher", then configure it as follows (see Integrating a Video Router for details). The "Router / Switcher" location is not stated on the official page and is our inference.

Router setup

  1. Set a name (optional).
  2. Enter the IP address of your VMix computer. Make sure the RCP can reach the computer.
  3. Link your cameras to the matching VMix inputs.
  4. Link your RCP to an auxiliary output.

Your RCP is now configured with VMix.

Router block

When you change camera on the RCP, the selected aux output follows.

Tally Input​

After configuring VMix as a router (above), enter the following in the "Tally" section of the VMix router:

  • "Red Tally Sources": AUTO
  • "Green Tally Sources": AUTO

Tally setup

This gives a green tally for preview and a red tally for live.

tip

For a different setup, you can enter any VMix output name instead of AUTO: Output, Preview, 1, 2, etc. If you need more tally outputs, see Tally Configuration.

Color Correction​

Add VMix as a "Video Processor" in "Components" and enter the following (the "Video Processor" location is not stated on the official page and is our inference):

  • Name (optional)
  • IP address

Color correction setup

The RCP now controls VMix color correction.

Color correction block

Next, click an existing camera:

Before assignment

Here, "Not controlled" means no camera is controlled, only the VMix color correction. You can also combine camera head control with VMix color correction.

In the right menu, scroll to "Video Processor" and select one of your VMix channels:

Selecting a channel

You now control VMix channel 1 from RCP camera 1.

After assignment