About Multi-Cam Dashboard

Product information

For product overviews, specifications, and purchase inquiries, see the product page of VILLAGE island, the distributor in Japan.
https://village-island.com/en/products/cyanview/

Source

This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Manuals/multi-cam-dashboard

The Multi-Cam Dashboard is a companion app for monitoring and controlling cameras. It is a web app built into the RCP, opened from a browser on your computer.

• Monitoring view: shows all cameras in a grid with their most important parameters
• Control panel view: opens a detailed control panel for a single camera with access to all parameters

Getting Started

1. Starting with release 26.2.1rc1, the Multi-Cam Dashboard is disabled by default. First enable it by clicking Enable under Admin in the device's Web UI (http://[device-ip])
2. Open http://[device-ip]:4000 in a browser, or click the Multi-Cam Dashboard link in the Web UI navigation bar
3. Add cameras in the settings and arrange the layout

For detailed steps, see "Overview & Initial Setup" in the Multi-Cam Dashboard Manual.

:::tip Difference from CyanView Studio The desktop app CyanView Studio, installed on a computer, also has a dashboard for controlling multiple RCPs and RIOs together. The Multi-Cam Dashboard is a web app built into the RCP, so you can use it from a browser without installing any software. :::

Manual

For initial setup, adding cameras, scenes, controls, groups, custom templates, and backup/restore, see the Multi-Cam Dashboard Manual.