RIO Power Supply

Source

This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Manuals/RIOManual

RIO does not support PoE. It must be supplied with 12V DC power via one of the following:

• D-Tap (from the camera or a battery)

• PSU (power supply unit)

• DC IN voltage: 10V to 24V

:::danger Be sure to check this The input voltage is applied directly to the camera. If powering from a battery, be sure the camera also supports the higher battery voltage. Also, for thermal reasons, camera power consumption per port must not exceed 12W.

The figures on this page are for reference only. Before installation, always check the latest specifications in the official Cyanview manual. :::