Tally Light Setup

Source

This content is based on Cyanview's official manuals. Always check the official page for the latest information and precise specifications.
https://support.cyanview.com/docs/Manuals/TallyLightManual

Connect to port 1 or 2 of the CI0/RIO.

Configuring via the RCP Web UI

1. Go to the GPIO page
2. Select the appropriate mode, "Red Tally" (default)
3. Click on the following intersection
   • "camera" (left column)
   • From "GPO" (top row), select "1:PWR" or "2:PWR" depending on the port you connected to

For more on tally output, see "Tally output" in Tally Configuration.