Overview
VP4 workflow overview
Prerequisites
- Network: VP4 requires an Ethernet connection to the RCP. A PoE switch is needed to power the RCP; otherwise, use an external 12V power supply for the RCP.
Connection
Connection configuration diagram
Configuration
VP4 can operate as a standalone unit through its dedicated Web UI, or it can be controlled from the RCP.
Genlock Setup
Genlock parameters can be configured from the VP4's web interface. You can reach the web interface at the IP address derived from the device's serial number (see "Finding your device's IP address" in IP Configuration).
Web UI Operation
VP4 color correction and color matching are performed from the RCP's "Multi-Matrix" screen.